yes its an Olson...
Tip number 1...try to plugged the UST and the Tru Mic into the module..then use the cable tie to secure only these two wires about 1.5inches each..this will look better and prevent any vibration which may come out amplified.
Cut the excess..
Then always fit the UST first and secure the wire with the clip provided...
next fit the UST first then position the Tru Mic with my attachment and fit it on the bridge plate..secure it with the clips provided.
fit the volume control module..
here's how it looks from the top..I'll try to see if I got time to post some sound clips..
Re: NEW LR BAGGS ANTHEM PICKUPS-with VIDEOSby Champion » Sat Aug 07, 2010 11:02 pm I've just fitted the Full Anthem on a Taylor 414..had the BBand A2.2 removed and then slowly removed all the adhesive from the internal of the guitar...
Installing the UST first
you asked for it..installation of the Element on the Taylor 414
|